49.
Next, install the motor/engine. The center and offset marks have been scribed
into the front of the firewall with a laser. Use a mounting template and align with
the marks on the firewall. Be sure to use the offset line to the right of the vertical
center line to accommodate for the motor offset due to the built in right thrust
angle in the motor box. Note: this same procedure can be used for mounting a gas
engine.
50. The distance from the front face of the motor box to the motor drive washer is
6 3/8". Use standoffs in conjunction with your motor to achieve this length. To
ensure proper cooling, the recommended location for mounting the ESC is on the
bottom of the motor box as shown in the picture below.
34
