17
Position the bracket so that the
center of the pivot is over the hinge
line as shown. Screw the bracket
into place with the two screws
provided. Screw the steering arm
into the base of the rudder as
shown.
Remove the tail wheel bracket and
add a drop of thin CA to each screw
hole. Allow to dry and screw back
into place.
Use hardware that came with your
servo to mount elevator and rudder
servos. The hardware packs for
“Stab” and “Rudder” contain the
links to connect the pushrods to the
servo arms as shown.
The “EZ link” for the servo arm is
assembled as shown.
Gather
your
power
system
components, and the motor mount
hardware pack.
