8
Note:
The curved horns are for
the ailerons, and the triangle
shaped horns are for the flaps.
Doing one control surface at a
time, mix up some epoxy, and
use a tool/stick to pace into the
holes of the control surface.
Wipe some epoxy onto the
sanded tab area of the horn,
and insert into control surface.
Clean any excess glue with
denatured alcohol (methylated
spirits).
Repeat for all flap and aileron
horns.
Using the hardware that came
with your servo, mount the
servos to the removable servo
access doors as shown.
