Extrema Machinery XS-1A25, Manual

Page: 8 / 27

ELECTRICAL CONNECTION
An authorized electrician should do the electrical connection.
1. Check whether the main voltage is in accordance with the connecting voltage mentioned on
the switch panel or wiring diagram.
•
The main cable should be screwed to the machine. The cable should be securely
fastened to the wall and connected with a main switch.
2. Now the connections in the terminal box must be taken care of. Notice the correct
connecting points (R-S-T and Ground). The ground wire color should be green or yellow-
green. To check proper rotation of the machine, press table up button. If the table goes
down, switch the R and T wires.
3. Now the conveyor motor is to be started and check the right rotation of conveyor belt. Also,
start the main motor and check the right rotation of the contact drum.
•
Tension should be placed on sanding belt before starting the main motor.
4. Close the cover of the terminal box carefully, so that no dust can accumulate in it.
•
Dust is the biggest enemy of electricity and could be the cause of many
disturbances.
5. Also check the V-belt tension. The belt may be pushed together a maximum of ¾” per belt.
After two weeks of operations the V-belt tension must be checked again since these will be
stretched initially.