©
2020 ExtraHop Networks, Inc. All rights reserved.
Deploy the ExtraHop Discover 10200
Appliance
Published: 2020-04-16
This guide explains how to install the rack-mounted EDA 10200 ExtraHop Discover appliance.
Installation prerequisites
To install the Discover appliance, your environment must meet the following requirements:
Appliance
2U of rack space and electrical connections for 2 x 1100 W power supplies.
Management
One 10/100/1000 BASE-T network port or one 10G BASE-SR port for appliance management.
Monitoring (capture)
High-performance interfaces: One to four network ports for connection to 100 GbE, 40 GbE, 25 GbE,
or 10 GbE sources of packet data, depending on the ordered configuration.
Mana monitoring interfaces: One to three network ports for connection to 1 GbE sources of
packet data.
Network Access
The TCP 443 port must be open between the Discover appliance and any system that connects to the
appliance for administration through the ExtraHop Admin UI.
For more information about the interfaces on the ExtraHop appliance, see the
Rear panel ports
EDA 10200
•
One iDRAC interface port
•
One RS-232 serial port to connect a console device
•
One VGA port to connect an external display
•
Two USB 3.0 ports to connect input devices such as a keyboard and mouse
•
Two power ports to connect the appliance to an AC power source
