Deploy the ExtraHop Discover 3000, 6000, or 8000 Appliances 4
EH6000
EH8000
Start using the Discover appliance
After logging in, you can navigate the ExtraHop browser-based graphical user interface to configure alerts,
monitor and troubleshoot your networks, view metrics for your devices, examine relative performance
within device groups, and adjust settings.
1.
Open a browser window and navigate to
https://<extrahop_ip>
, where
<extrahop_ip>
is the
IP address displayed on the LCD at the front of the Discover appliance.
The default login is
setup
and password is the service tag number on the pullout tab on the front of
the appliance.
2.
Optional: You can modify user names and passwords in the ExtraHop Admin UI at
https://
<extrahop_ip>/admin
.
Enable the 10/100/1000 BASE-T ports (EH6000/8000 only)
On the EH6000/8000, the 10GbE ports support SFP+ SR-fiber modules. In certain circumstances, you
might want to configure the additional 10/100/1000 BASE-T ports (labeled Gb2, Gb3, and Gb4 on the
Discover appliance) for monitoring instead of the 10G BASE-SR ports.
The Gb1 port is a dedicated management interface and cannot be configured for monitoring.
Depending on your license, the Gb3 and Gb4 ports might be disabled on the ExtraHop system. Contact
ExtraHop sales at
sales@extrahop.com
for information about licensing these additional ports.
1.
In your browser, navigate to the Web UI on the ExtraHop appliance at
https://<extrahop_ip>/
admin
, where
<extrahop_ip>
is the IP address displayed on the LCD at the front of the Discover
appliance. Log into the system with the assigned user name and password.
2.
Go to the Network Settings section and click
Connectivity
.
3.
In the Interface Status section, a diagram of the back of the Discover appliance is displayed.