Extraflame LUISELLA, User Manual

Page: 24 / 36

24 ENGLISH
Cleaning and maintenanCe
always follow the instruCtions in Complete safety!
Š Make sure that the power supply cable plug is disconnected, since the generator could be programmed to switch-on.
Š
That the generator is completely cold.
Š
The ashes are cold.
Š Ensure proper ventilation of the room when cleaning the stove.
Š Lack of cleaning jeopardises correct operation and safety!
maintenanCe
For correct operation, the generator must undergo routine maintenance by a qualified technician, at least once a year.
The periodic inspection and maintenance operations must always be performed by specialised, qualified technicians, who operate in
accordance with the laws in force and the instructions given in this use and maintenance manual.
periodiC Cleaning by the user
As indicated in this use and maintenance manual, periodic cleaning must be performed paying great attention, after having read the
indications, to the procedures and times described herein.
Cleaning the surfaCes and Covering
never use abrasive or chemically aggressive detergents for cleaning!
The surfaces must be cleaned when the generator and covering are completely cold. Fir maintenance of surfaces and metal parts, just use a
cloth dampened in water or water and neutral soap.
Failure to comply with the indications can damage the surfaces of the generator and cause the warranty to become null and void.
Cleaning the CeramiC glass
never use abrasive or chemically aggressive detergents for cleaning!
The ceramic glass must only be cleaned when the glass is completely cold.
To clean the ceramic glass, simply use a dry brush and some damp newspaper dipped in ash. If the glass is very dirty, use a specific cleaning
agent for ceramic glass. Spray a small amount on a cloth and use it on the ceramic glass. Do not spray the cleaning agent or any other liquid
directly on the glass or seals!
Failure to comply with these instructions may damage the surfaces of the ceramic glass and cause the invalidation of the warranty.
Cleaning the pellet tank
When the tank is completely empty, disconnect the power cable of the generator and remove the residues first (dust, chippings, etc.) from the
empty tank, and then fill it.
EvEry yEar, gEt thE fumE dischargE systEm, thE fluE pipEs and thE "t" fittings and inspEction caps
clEanEd - if prEsEnt, also thE Elbows and horizontal sEctions!
thE clEaning frEQuEncy of thE gEnErator is indicativE! it dEpEnds on thE Quality of thE pEllEts usEd
and frEQuEncy of usE.
thEsE opErations must bE pErformEd morE frEQuEntly.
to find out whErE your nEarEst sErvicE cEntrE is, contact your dEalEr or go to thE wEbsitE:
www.lanordica-EXtraflamE.com