Extraflame LUISELLA, User Manual

Page: 14 / 36

14 ENGLISH
General menu
Basic insTrucTions
The following recommendations must be followed the first times
the stove is ignited:
Š It is possible that slight odours are produced due to the drying
of the paints and silicone used. Do not remain in the room for long
periods.
Š
Do not touch the surfaces as they could still be unstable.
Š Ventilate the room well several times.
Š The hardening of surfaces will stop after several heating cycles.
Š
This appliance must not be used to burn waste.
Before lighting the stove, the following points must be checked:
Š
The hopper must be loaded with pellets
Š
The combustion chamber must be clean
Š The burn pot must be completely free and clean
Š
Check the hermetic closure of the hoper, fire door and ash
drawer
Š
Check that the power cable is properly connected
Š The bipolar switch in the rear must be positioned on 1.
air
(Ventilation)
rpm
(Speed)
EaSY
(Pellet calibration)
Crno
(Chrono)
aBiL
(Enable)
prg1
(PROGRAMMING 1)
prg2
(PROGRAMMING 2)
SET
(Settings)
daTE
(Date)
prg3
(PROGRAMMING 3)
daY
(Day)
prg4
(PROGRAMMING 4)
TimE
(Time)
Lng
(Language)
STBY
(Stand-by)
dELT
(Delta-T)
*STaT
(Status)
C-f
(Celsius/Fahrenheit)
rES
(Reset)
*TECHNICIANS ONLY
*TECh
(Technical Menu)
1
ON/OFF BUTTON - EXIT MENU
2
SCROLL UP - CONFIRM
3
SCROLL DOWN
4
PRESS AND HOLD TO ACCESS MENU - ACCESS SELECTED MENU -
INCREASE VALUE
5
DECREASE VALUE
2
1
1
2
3
4
5