Extraflame LUCIA, User Manual

Page: 20 / 36

20 ENGLISH
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change while keeping
the quality of the pellet unchanged. use the eAsy seTup function to change the calibration of the volumetric weight by increasing or
decreasing the preset values.
in the stove program, the available values from "- 3" to "+ 3"; all stoves are calibrated in production with the optimal value which is 0.
if you notice an excessive deposit on the burn pot, enter the eAsy seTup program and reduce the value to “- 1”; then wait the following day
and if you do not see an improvement reduce it even more up to a maximum of “- 3”.
if, on the other hand, it is necessary to increase the calibration of the volumetric weight of the pellet, switch the factory value from "0" to "+
1, + 2, + 3" as required.
EXCESSIVE PELLET DEPOSIT IN THE BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN THE BURN POT
-3 -2 -1 0 +1 +2 +3
ThirD
DecreAse
rAnge iF The
FirsT TWo Are
noT enough
seconD
DecreAse
rAnge iF The
FirsT is noT
enough
FirsT DecreAse
rAnge (TesT
For 1 DAy)
opTimAL FAcTory
vALue
FirsT increAse
rAnge
seconD
increAse
rAnge iF The
FirsT is noT
enough
ThirD increAse
rAnge iF The
FirsT TWo Are
noT enough
conTroLs proceDure
Š
press 6.
Š press key 3 until
EASY SETUP
appears and confirm by pressing key 6.
Š use keys 4 -5 to set the range.
Š press 6 to confirm or 1 to return to the previous menus to the initial state.
N.b.: If THIS CALIbRATION DOES NOT SOLvE THE PELLET DEPOSIT IN THE bURN POT, PLEASE CONTACT YOUR LOCAL
SERvICE CENTRE.
fRONT AIR
This menu allows you to set the front air motor speed. range: (comfort, auto).
if you select comfort mode, the front air speed is reduced
To ensure combustion efficiency, the front air is excluded when the product is at the minimum power.
conTroLs proceDure
Š
press 6.
Š
confirm FRONT AIR by pressing 6.
Š
use keys 4 -5 to set the desired mode.
Š
press 6 to confirm or 1 to return to the previous menus to the initial state.