Extraflame LUCIA, User Manual

Page: 18 / 36

18 ENGLISH
SETTINgS fOR fIRST USE
After connecting the power cord at the back of the stove, turn the switch located at the back to position (I).
The switch at the back of the stove is used to power the generator board.
The stove will remain off and the word OFF will appear on the panel.
SUPPLY fREqUENCY 50/60 Hz
if the stove is installed in a country with a frequency of 60hz, the display will show the message "poWer FreQ. error ".
change the frequency as described below.
conTroLs proceDure
Š
press 6,
Š
select the required frequency using keys 4 or 5.
Š
press 6 to confirm or 1 to return to the previous menus to the initial state.
DATE-TIME
This menu allows you to set the time and date.
conTroLs proceDure
Š
press 6.
Š
press 3 until SETTINGS appears and confirm by pressing 6.
Š
confirm DATE-TIME by pressing 6 and using 4 and 5 to set the day.
Š
Keep pressing 6.
Š
use keys 4 or 5 to set and 6 to move forward, to set the day, time, minutes, date, month, year.
Š
press 6 to confirm or 1 to return to the previous menus to the initial state.
LANGUAGE
This menu allows you to set the preferred language.
The available languages are: italian - english - german - French - spanish - portuguese.
conTroLs proceDure
Š
press 6.
Š press 3 until
SETTINGS
appears and confirm by pressing 6.
Š press 3 until
LANGUAGE
appears and confirm by pressing 6.
Š select the language using keys 4 or 5.
Š press 6 to confirm or 1 to return to the previous menus to the initial state.
DEGREES
This menu allows you to set the unit of measurement for the temperature. The preset value is °c.
conTroLs proceDure
Š
press 6.
Š
press 3 until SETTINGS appears and confirm by pressing 6.
Š press 3 until
DEGREES
appears and confirm by pressing 6.
Š use keys 4 -5 to select celsius or Fahrenheit.
Š press 6 to confirm or 1 to return to the previous menus to the initial state.
J
NO IgNITION
THE fIRST IgNITION MAY fAIL, SINCE THE AUgER IS EMPTY AND IT IS NOT ALWAYS POSSIbLE TO fILL THE bURN
POT WITH THE RIgHT AMOUNT Of PELLETS TO START THE fLAME REgULARLY. If THE PRObLEM OCCURS ONLY
AfTER A fEW MONTHS Of OPERATION, MAkE SURE THAT THE ROUTINE CLEANINg OPERATIONS INDICATED ON
THE STOvE bOOkLET HAvE bEEN CARRIED OUT PROPERLY