ENGLISH
J
a Clean brazier ensures suCCessful operation!
keeping the brazier and its holes always thoroughly Clean
froM any residue froM the CoMbustion, guarantees exCellent
CoMbustion of the generator over tiMe, to avoid any MalfunCtions
that May reQuire the intervention of the teChniCian.
it is possible to use the funCtion in the user Menu "adjustMent
set - pellet load to adjust CoMbustion based on the desCribed
reQuireMents.
BURN POT
HOLES
if the power supply Cable is daMaged, it Must be replaCed by teChniCal serviCe staff or in any Case
by a siMilarly Qualified teChniCian, so as to avoid all risks.
routine MaintenanCe perforMed by Qualified teChniCians
routine maintenance must be performed at least once a year.
Since the generator uses pellets as its solid fuel, it requires an annual routine maintenance operation which must be performed by a
qualified
technician, using original spare parts only.
Failure to comply with the above can compromise the safety of the appliance and void the guarantee conditions.
Complying with the cleaning intervals dedicated to the user described in the use and maintenance manual will guarantee the correct
combustion by the generator over time, avoiding any malfunctioning and/or failures which could require further intervention by the
technician. Routine maintenance requests are not covered by the product guarantee.
door gaskets, ash drawer and burn pot
Gaskets guarantee the hermetic seal of the stove and its ensuing correct operation.
They must therefore be checked regularly: should they be worn or damaged, replace them immediately.
This must be performed by a qualified technician.
ConneCtion to the ChiMney
Suction and clean the flue duct leading to the chimney once a year or whenever necessary. If the installation entails horizontal flue duct
sections, suction all residue before it obstructs the passage of fumes.
deCoMMissioning (end of season)
At the end of every season, before you turn the stove off, it is advisable to empty the pellet tank completely, suctioning any pellet residue and
dust from the inside.
WE ADVISE YOU NOT TO DISCONNECT THE GENERATOR FROM THE ELECTRICAL POWER SUPPLY, SO AS TO ALLOW THE PUMP TO PERFORM THE
NORMAL ANTI-LOCKING CYCLES.
Routine maintenance must be performed at least once a year.
27
Summary of Contents for DIADEMA ACS IDRO
