Extraflame DELIZIA, User Manual

Page: 25 / 44

USER PARAMETERS
25
Chapter 8
PELLET OVEN MODE
Before proceeding make sure that the stove is on. In oven mode, the stove adapts its work to give priority
to heating the oven; this implies that it is not possible to modify the work power.
All stove automatic functions will also be temporarily suspended (weekly programmer, day-night
temperature function and external thermostats functioning). The automatic functions will become active
again on deactivation of the oven.
To activate this mode it is necessary to enter the user parameters, i.e. press key 3, hold it down and then
press key 5. Now release both keys at the same time.
Display D2 shows “
ON/OFF ” which will allow to enable/disable oven functioning, by pressing key 4.
Display D1 will show 2 fl ashing messages: “ OVEN ” and the temperature for the oven “170 - 250” (minimum
and maximum). Adjust the desired temperature using keys 2 and 3.
Once the oven is activated and the temperature adjusted, press button 5 to confi rm and continue.
“
TIMER ” will appear fl ashing on D1 followed by “ OFF ” or a time expressed in minutes “ 000 - 255 ”; at this
point two functions can be selected: normal or timed functioning.
NORMAL FUNCTIONING (NO TIMER)
Use buttons 2 and 3 to adjust the timer to “ OFF ”. The stove will work to take the oven to the pre-established
temperature without any time limit. To confi rm and escape press button 5.
In this mode display D1 will show running “
PELLET OVEN ”, while display D2 will show the current
temperature of the oven (the temperature will be shown starting from 60°C; below this the display will
show
- - - - ).
TIMED FUNCTIONING (WITH TIMER)
Use buttons 2 and 3 to adjust a desired working time. The stove will work to take the oven to the pre-
established temperature. At the end of the set working time stove display D1 will show “
END OF COOKING ”:
at this point the stove will go to 1st power. To confi rm and escape press button 5.
In this mode, two messages will appear alternately on the 2 displays:
In this mode display D1 will show running “
™
PELLET OVEN ” accompanied by the current temperature
of the oven on display D2 (the temperature will be shown starting from 60°C; below this the display will
show
- - - - ).
display D1 will show “
™
TIMER ” accompanied by the remaining time on the timer on display D2. It will
be possible to modify the remaining time using keys 2 and 3.
ELECTRIC OVEN MODES
Before proceeding make sure that the stove is off completely and cold.
To activate this mode it is necessary to enter the user parameters, i.e. press key 3. hold it down and then
press key 5. Now release both keys at the same time.
Display D2 shows “
ON/OFF ” which will allow to enable/disable oven functioning, by pressing key 4.
Display D1 will show 2 fl ashing messages: “ OVEN ” and the temperature for the oven “ 70 - 250 ” (minimum
and maximum). Adjust the desired temperature using keys 2 and 3.