29
ENGLISH
Cleaning and maintenanCe
always follow the instruCtions in Complete safety!
Make sure that the power cord is unplugged because the generator may have been programmed to switch on.
That the generator is cold all over.
That the ashes are completely cold.
Ensure efficient air exchange in the room during the product cleaning operations.
Poor cleaning will compromise correct operation and safety!
maintenanCe
For correct operation, the generator must undergo routine maintenance by a qualified technician, at least once a year.
The periodic inspection and maintenance operations must always be performed by specialised, qualified technicians, who operate in
accordance with the laws in force and the instructions given in this use and maintenance manual.
periodiC Cleaning under user's responsibility
The periodic cleaning operations, as indicated in this use and maintenance manual, must be performed with the utmost care after reading the
instructions, procedures and frequency described in this use and maintenance manual.
Cleaning the surfaCes and Covering
never use abrasive or chemically aggressive detergents for cleaning!
The surfaces must be cleaned when the generator and coating are completely cold. For the maintenance of the surfaces and metal parts,
simply use a cloth dampened with water or water and neutral soap.
Failure to follow the instructions may lead to damage to the generator surfaces and invalidate the warranty.
Cleaning the CeramiC glass
never use abrasive or chemically aggressive detergents for cleaning!
The ceramic glass must be cleaned when the glass is completely cold.
To clean the ceramic glass, simply use a dry brush and some damp newspaper dipped in ash. If the glass is very dirty, use a specific cleaning
agent for ceramic glass. Spray a small amount on a cloth and use it on the ceramic glass. Do not spray the cleaning agent or any other liquid
directly on the glass or seals!
Failure to comply with these instructions may damage the surfaces of the ceramic glass and cause the invalidation of the warranty.
Cleaning the pellet hopper
When the hopper is completely empty, disconnect the power cord of the generator, remove the residues (dust, chippings, etc.) from the empty
hopper and then fill it up.
every year, have the fume extraCtion system, flue pipes and "t" fittings, inCluding the inspeCtion
Caps Cleaned. if present, also Clean the elbows and horizontal seCtions!
the generator Cleaning freQuenCy is indiCative! depends on the Quality of the pellet used and on
how often it is used.
these operations may sometimes need to be performed more often
TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE
WEBSITE:
WWW.LANORDICA-EXTRAFLAME.COM
if the power Cord is damaged, it must be replaCed by the serviCe Centre or by a similarly Qualified
person, so as to avoid all risks.
the pellet hopper gaskets, burn pot and fire door guarantee CorreCt stove operation. these need
to be periodiCally CheCked by the user. if they are worn or damaged, replaCe them immediately.
these operations must be performed by a Qualified teChniCian
.
Summary of Contents for 001284000
