background image

6

ENGLISH

Warnings

This instructions manual is an integral part of the product: make sure that 

it always accompanies the appliance, even if transferred to another owner 

or user, or if transferred to another place. If it is damaged or lost, request 

another copy from the area technician. This product is intended for the use 

for which it has been expressly designed. The manufacturer is exempt from 

any liability, contractual and extracontractual, for injury/damage caused to 

persons/animals and objects, due to installation, adjustment and mainte-

nance errors and improper use.

Installation must be performed by qualified staff, which assumes com-

plete responsibility for the definitive installation and consequent good 

functioning of the product installed. One must also bear in mind all laws 

and national, regional, provincial and town council Standards present 

in the country in which the appliance has been installed, as well as the 

instructions contained in this manual.

The Manufacturer cannot be held responsible for the failure to comply 

with such precautions.

After removing the packaging, ensure that the content is intact and com-

plete. Otherwise, contact the dealer where the appliance was purchased.

All electric components that make up the product must be replaced with 

original spare parts exclusively by an authorised after-sales centre, thus 

guaranteeing correct functioning.

safety

 

Š

THE APPLIANCE MAY BE USED BY CHILDREN 8 YEARS OF AGE OR 

OLDER AND INDIVIDUALS WITH REDUCED PHYSICAL, SENSORY, OR 

MENTAL CAPACITIES OR WITHOUT EXPERIENCE OR THE NECESSARY 

KNOWLEDGE, PROVIDED THAT THEY ARE SUPERVISED OR HAVE 

RECEIVED INSTRUCTIONS ON SAFE USE OF THE APPLIANCE AND THAT 

THEY UNDERSTAND THE INHERENT DANGERS.

 

Š

THE GENERATOR MUST NOT BE USED BY PERSONS (INCLUDING 

We thank you for having chosen our company; our product is a great heating solution developed from the 

most advanced technology with top quality machining and modern design, aimed at making you enjoy the 

fantastic sensation that the heat of a flame gives, in complete safety.

Summary of Contents for 001283800









































Reviews: