Extra 575 user manual
Entar Professional Limited
3
INTRODUCTION
MAIN FEATURES
540°pan and 270° tilt at 8/16 bit
DMX channels: 13
Lamp: Discharge lamp 575W, double ended (optional)
Power consumption: 660W
Dimmer: Smooth mechanical dimming 0-100%
Strobe: 1~10 f.p.s.
Prism: Rotating in both directions, three faces prism
Color: 8 plus open white with rainbow effect
Rotating gobo: 6 plus open white
Focus: Motorized
Speed: pan and tilt speed adjustment
Pan and tilt position correction
SETUP
UNPACKING
The Extra 575 comes with:
User manual
Power cable
2x XLR connectors
Lamp and clamps are optional (Please contact your dealer for more information)
AC POWER
Warning!
For protection from electric shock, the fixture must be grounded (earthed). The power supply
shall have overload and ground-fault protection.
RIGGING OR MOUNTING THE EXTRA 575
Warning!
Attach an approved safety cable to the attachment point provided in the base. Never use the
carrying handles for secondary attachment. Always use an approved safety cable.
CONNECTING THE SERIAL DATA LINK
The Extra 575 has locking 3-pin data input and output sockets that are wired for use with DMX devices
with pin 1 to shield, pin 2 to cold(-) and pin 3 to hot(+).
1. Connect the controller’s output to the fixture’s data input.
2. Connect the output of the fixture closest to the controller to the input of the next fixture. If connecting
a fixture with pin 3 hot to a fixture with pin 3 cold, use a phase-reversing adaptor.
3. To terminate the link, insert a male 120
Ω
XLR termination plug in the output of the last fixture.
