s. 9
x 12
x 4
You must use approved lifting devices
when you lift, assemble, and move
the equipment.
2. Install the upper
section to the
stand. Make sure
that the alignment
is correct.
4.
Usually the suction
unit is fastened to the
concrete floor with
expansion bolts. If
necessary, use
adjustment blocks to
ensure levelness of the
3. Connect plug
1. Attach the hoist
lines to the three
lugs. Make sure
that the weight is
distributed evenly.
5. Route cables to cable
clamps
ASSEMBLY
6
.
Connect the power
plug of the motor.