Instructions
Choose a flat surface to pitch tent. Remove the tent from the carry bag.
Inflating
1.
Lay and unfold the 2 person tent evenly and peg down base of tent using iron pegs..
2.
Screw on all main valves properly.
3.
Unscrew cap to pump.
4.
Begin to inflate tent at valve points using manual pump provided.
5.
Pump tent making sure to lift the pump handle to its full extension and its complete
close. Until tent is fully inflated, assist air poles. DO NOT over inflate – pump only
enough air to hold tent up.
6.
Screw cap on valve point/s.
7.
Place 2 glow rings on alloy pegs.
8.
Unroll guy ropes at all points and peg them down using alloy pegs on a 45˚ angle.
9.
Tighten, but do not over tighten guy ropes; this can lead to the distortion of the tents’
shape.
