30
Details
Software Version
The version of the currently installed device
firmware
Full Version
The full firmware build code
Serial Number
The receiver serial number (MAC address)
IP Address
The IP address assigned to the receiver
Product Type
The receiver hardware code information
Total Resets
The total number of times the receiver has been re-started
Soft Resets
The number of times the receiver has been re-started using the command line interface
Remote Resets
The number of times the receiver has been re-started using the web management interface or SNMP commands, for example, from
AvediaServer Director
Uptime
The length of time since the last restart
Display Status
Output Format
Displays the configured Screen settings for the display device (Receiver Properties > Screen). When the Screen Resolution is set to Auto, the
receiver outputs at the resolution requested by the display device.
HDMI/HDCP Status
“
Authentication has succeeded
” is displayed when the AvediaPlayer r92xx has confirmed it is outputting to an HDCP-compliant device via
the HDMI interface.
"
Authentication has failed
” is displayed when there has been a problem between the AvediaPlayer Receiver and the TV/display. This may be
because the TV is in standby, or the TV HDCP chip may be inaccessible.
"
Authentication in progress
” is displayed during the authentication process.
“
No HDCP device on the HDMI interface
” is displayed when the display device connected to the AvediaPlayer Receiver is not HDCP-
compliant.
"
A device is connected on the HDMI interface
” is displayed when a device has been detected on the receiver’s HDMI interface.
"
Nothing is detected on the HDMI interface
” is displayed when nothing is connected to the receiver’s HDMI interface.
“No encryption on the HDMI interface”
is displayed when the stream is not HDCP-protected.
Name and Location
Name
The name of the AvediaPlayer Receiver. The default value is the last 6 characters of the serial number of the receiver.
Location
The location of the AvediaPlayer Receiver. The default value is ‘default’.
