Extel WAPP-GI2SU, Installation And User Manual, Page: 100 / 164

4. Click SAVE to complete the camera settings. The system con fi rms the user identity and grants permission to
user access.
5. You can refer to "ADD CAMERA" section for detail on adding additional camera(s).
In most cases, you can successfully add the camera according to the steps above. However, the camera will not
fi nd the network if Wi-Fi router turns off the SSID broadcasting function. Please enable the SSID broadcasting
to complete the settings.
Note:
After you have entered the default password, the APP will remind you to change the default password.
Note:
Most Wi-Fi routers broadcast the Service Set Identi fi er (SSID) by default. This is the name of your wireless
network, and SSID broadcasting is how Wi-Fi-enabled devices fi nd networks.
The camera will only accept SSID composed with English alphabet characters and Arabic numbers. Non-
English and special characters (!@#$%, etc.) will not be accepted.
5. LIVE VIEW / SNAPSHOT / RECORDING
Tap to take snapshot image(s) of the video. The captured
snapshots will be stored in your mobile device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The recorded video fi le will be
stored in the memory card of your camera.
Tap to set/move camera to default postion
Tap and hold the icon to send the voice to remote device
(Push To Talk)
Tap to return to the main page.
Control camera direction via fi nger swipe.
The APP allows users to have access to live video. User can take snapshot image(s) and record the live video.
When you launch the App on the smart phone or tablet, the image displaying on the main screen is the very last
automatically captured snapshot from the live view of the previous established session. Tap the image to enter
live view mode.
CFI EXTEL O’MOUV HD - 10/2015
GB7