10
SDL800-EU-EN-V1.2-11/11
Specifications
Display
Backlit LCD; LCD size: 52 x 38mm (2 x 1.5”)
Status indicators
Over-range audible beep and low battery display icon
Frequency Range
10Hz to 1kHz
Datalogger Sampling Rate
AUTO LOGGING: From 1 to 3600 seconds.
MANUAL LOGGING: Set the sampling rate to ‘0’ seconds
Memory Card
SD memory card; 1G to 16GB size
Data Hold
Freeze the displayed reading
Memory Recall
Record and Recall the Maximum and Minimum readings
Display update rate
Approx. 1 second
Data Output
RS-232 / USB PC computer interface
Operating Temperature
0 to 50°C (32 to 122°F)
Operating Humidity
85% R.H. max.
Auto Power OFF
After 10 minutes of inactivity (can be disabled)
Power Supply
Six (6) 1.5 VDC batteries (optional 9V AC adaptor)
Power Consumption
Normal operation (backlight and datalogger OFF): approx. 5mAdc
With backlight OFF and datalogging ON: approx. 25mAdc
With backlight ON add approx. 12mAdc
Weight
343g (0.75 lbs.) w/ batteries; 241g (0.53 lbs.) w/o batteries
Dimensions
Meter: 182 x 73 x 47.5mm (7.1 x 2.9 x 1.9”)
Vibration sensor: round 16mm (0.63”) diameter, 37mm (1.46”)
length
Electrical Specifications
Function
Unit
Range
Accuracy
m/s
2
0.5 to 199.9 m/s
2
g
0.05 to 20.39 G
ft/s
2
2 to 656 ft/s
2
± ( 5%rdg + 2 d )
@ 80 and 160Hz
Acceleration
Calibration Point: 50 m/S^2 ( 160 Hz )
mm/s
0.5 to 199.9 mm/s
cm/s
0.05 to 19.99 cm/s
inch/s
0.02 to 7.87 inch/s
± ( 5%rdg + 2 d )
@ 80 and 160Hz
Velocity
Calibration Point: 50 mm/s ( 160 Hz )
mm 1.999
mm
inch 0.078
inch
± ( 5%rdg + 2 d )
@ 80 and 160Hz
Displacement
Calibration Point: 0.141 mm ( 160 Hz )
Above specification tests under the environment RF Field Strength less than 3 V/M & frequency less
than 30 MHz only and 23±0.5
Ԩ
Copyright
©
2011 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com
www.burntec.com
