2 DV20-en-US_V2.6 12/21
Miscellaneous
•
The product is not a toy and should be kept out of reach of children and pets!
•
On commercial premises, the accident prevention regulations of the Association of Industrial Professional Associations with
respect to electrical systems and operating equipment must be observed.
•
In schools, training centers, Hobby and DIY workshops, the handling of measuring appliances must be responsibly supervised by
trained personnel.
•
Servicing, adjustment, or repair works must only be carried out by a specialist/ specialist workshop.
4.
Operating Elements
a.
Battery compartment cap
b.
LED light switch
c.
Detector clip
d.
Detector grip area
e.
Detector tip
f.
LED light
5.
Operation
Before each use, test the device on known working circuit that is within the rating of this device. Place the tip of the device near an
AC voltage. Upon detection, the tip will glow. If there is no indication, voltage could still be present. Operation may be affected by
differences in socket design and insulation thickness and type. The device cannot detect voltage inside armored cable or cable in
conduit, behind panels or in metallic enclosures.
In additional, an LED flashlight can be turned on by pressing the LED light switch (b).
6.
Battery replacement
If the indicator becomes dim, replace the battery as soon as practical.
1.
Left the clip (c) up carefully and push the battery compartment cap (a) out.
2.
Replace the used battery with two new AAA batteries.
3.
Replace the cap (a) until engage audibly.
4.
Device turns on once the batteries are inserted.
Disposal:
Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle
7.
Maintenance
Switch off the appliance before cleaning the appliance with dry, anti-static cloth only. Do not use abrasive or solvents!
8.
Technical data
Voltage sensing range
100
–
600V~, 50/60Hz
Overvoltage category
600V, CAT III
Pollution degree
2
Operating temperature
32°F to 122°F
Battery type
2 x AAA (NEDA 24A, R03 or micro cell)
Batteries