DT40_60_100M-en-GB_v1.0 8/17
14
6.
Press MEASURE to turn Laser ON, if it is not already ON.
7.
From Point X, align the meter as horizontal as possible and
aim for Point 2 and then press MEASURE.
8.
The measurements are now complete. The primary display
line (bottom) indicates the vertical distance from Point 1 to
Point 2. Auxiliary lines 1 and 2 show the two separate
measurements.
Double Pythagorean Calculation
(3 Measurements)
This device can measure height in two
segments by taking three measurements. The
operator stands at Point X. The first
measurement is Point X to 1, the second
measurement is a horizontal line from Point X
to 2, and the third measurement is from Point
X to 3.
1.
Press the MEASURE key to switch the meter ON.
2.
Press the
key two times.
3.
The double triangle icon
will appear with its top diagonal
line flashing.
4.
Press MEASURE to turn Laser ON, if it is not already ON.
5.
From Point X, aim the instrument at Point 1 and press
MEASURE. One reading is now complete and the middle line
of the double triangle will begin flashing.
6.
Press MEASURE to turn Laser ON, if it is not already ON.
7.
From Point X, aim the instrument horizontally at a Point 2
and press MEASURE. The second reading is now complete
