17
EX
-
6111
English
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
6. VCOM Admin Utility
Since the EX
-
6111 was shipped with DHCP mode enabled, an IP address is required to configure
it. By default, the EX
-
6111 automatically receives an IP address from a DHCP server (e.g. your
router). If it is not connected to a DHCP server, use the default IP address: 192.168.2.1. To deter-
mine the IP address, you must install the VCOM Admin Utility (
vspsetup.exe
) that comes with the
device. The installation program is located on the driver CD included in the scope of delivery in the
following folder.
Attention!
Please run the installation program with right click "Run as administrator!
1. Get the IP address:
Start the VCOM Admin Utility (right
-
click on the VCOM Admin Utility
shortcut on the Windows desktop and start this with
„
Run as Administrator
“).
Click
Remote Device Management
>
ADD Device
>
Search
After the EX
-
6111 was found, click
Cancel
to abort the search.
Click
OK
, to add the EX
-
6111.
