13
EX
-
45362
English
Modes
RS
-
232
RS
-
422
RS
-
485 2
-
wire
RS
-
485 4
-
wire
Port 1
Port 2
4. Switch and Jumper Settings
4.1
Switch Settings
There are two 8
-
pin DIP
-
switches on the board of the EX
-
45362. For each port there is
a separate DIP
-
switch. The 8
-
pin DIP
-
switches are for the modes (RS
-
232, RS
-
422,
RS
-
485 2
-
wire or RS
-
485 4
-
wire) and for the signal termination for RX+, RX
-
, TX+ and
TX
-
(see picture on page 12 under layout). The settings can be set individually for each
serial port. The DIP
-
switch at the top are responsible for the port 1 (S1) and DIP
-
switch
below are responsible for the port 2 (S2). The following tables on page 13, 14 and 15
you can see the setting of the mode switch and terminator switch. Additionally the set-
ting of the mode switch are printed on the back of the board.
Mode & Terminator Switch (S1_MODE
-
S2_MODE)
