14
English
EX
-
1329
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
4. Hardware Installation
3. Layout, Connections & DIP
-
Switch
3.3
DIP
-
Switch
DIP
-
Switch
Ethernet Port
DIP
-
Switch
Position
Description
1
Port 1
OFF
Disabled*
ON
Enabled* (Factory Setting)
2
Port 2
OFF
Disabled
ON
Enabled (Factory Setting)
3
Port 3
OFF
Disabled
ON
Enabled (Factory Setting)
4
Port 4
OFF
Disabled
ON
Enabled (Factory Setting)
Note!
*DIP
-
Switch 1 controls the Onboard Windows Driver. If DIP
-
Switch 1 is enabled,
then also the driver is enabled. Otherwise the DIP
-
Switch 1 is disabled, then also
the driver is disabled.
Because there are large differences between PC’s, we can give you only a general in-
stallation guide. Please refer your computer’s reference manual whenever in doubt.
1.
If you want to install the EX
-
1329 on a wall or on a DIN
-
Rail, then please go ahead
with the steps 5, 6 & 7 on page 15 before proceeding to step 2.
2.
Set the DIP
-
Switches 2, 3 & 4 to disabled and only the DIP
-
Switch 1 to enabled and
connect the included USB cable to the USB C
-
Port of the hub.
3.
Connect the optional power supply to the DC connector at the hub.
4.
Now connect the other end from the USB cable (A
-
Plug) to the A
-
Port at your PC.