12
Installation Step 4
Leak Detector
Note!
Please avoid contact of any liquid to the compressed textile.
Failure to do so will activate the textile and shut the incoming water.
1.
POSITION THE SYSTEM TO THE DESIRED
PERMANENT LOCATION
4.
TAKE OFF THE PLASTIC WRAP AND
PLACE THE COMPRESSED TEXTILE
5.
TURN THE SWITCH DOWN, AND THE LEAK
DETECTOR IS READY TO BE USED
2.
POSITION THE LEAK DETECTOR IN THE
SAME CABINET NEAR THE SYSTEM AND
SCREW IT TO THE CABINET FLOOR
OUT
OUT
IN
OUT
IN
3.
CONNECT THE
RED
TUBE INTO THE FEED VALVE AND INTO THE INLET (
IN
) OF
THE LEAK DETECTOR. CONNECT THE
WHITE
TUBE INTO THE OUTLET (
OUT
) OF THE
LEAK DETECTOR AND INTO THE 1ST STAGE OF THE RO SYSTEM (
TO FEED
)
OUT
IN
Red Tube
Red
Tube
White Tube
White
Tube
