Exposure MaXm-D, Owner'S Manual, Page: 12 / 16

www.exposurelights.com
12
Power Port: how to activate
[RedEye rear lights and White Eye]
With Smart Port Technology (SPT) there is the option to run various
accessories from the Power Port such as the RedEye rear light or the
WhiteEye.
All SPT accessories work on 2009 (MaXx-2) and 2010 model lights which
display the “SPT” logo etched on the bodywork of the light. They will NOT
work on 2008 MaXx model lights.
If you are a cyclist using the Exposure Light you will be aware of how
important it is to be seen from behind as well as from the front to remain
safe from other road users. Smart Port Technology enables Charge Port to
become a Power Port to power the RedEye rear lights or WhiteEye.
To activate Power Port: When the light unit is off, press and hold the function
button until the main LEDs rapid flash then release button.
Now turn on the light unit in the normal way with double click. A rapid flash
shows as the light turns on. This indicates you now have the light on with
the Power Port activated.
Now plug in RedEye or WhiteEye accessory and you will get a bright,
constant output from the accessory.
With Power Port activated you can use all the front LED light modes as
normal. When you turn off the light unit it will reset the Power Port. You will
need to repeat the switch-on procedure to activate the Power Port again.
You can not run two Smart Port Technology accessories at the same time.
Model and Accessory High Setting Med Setting Low Setting
Joystick with RedEye 2hr 15min 5hr 30min 8hrs
Joystick with WhiteEye 1hr 30min 2hr 15min 2hr 40min
Diablo with RedEye 55 mins 2hr 15min 5hr 20min
Race with RedEye 2hr 30min 7hrs 12hrs
Strada with RedEye 2hr 30min 7hrs n/a
Toro with RedEye 2hr 45min 7hr 45min 14hrs
MaXxD with RedEye 2hr 45min 8hr 15min 16hrs
BURN TIME REDUCTION WITH SPT ACCESSORIES