First Light:
Diablo
– Press the Function button once (one green flash to confirm). It will now be ready to
reconnect.
Bar Lights
– Press the Function button once. The screen will end up showing SYNC, it is now
ready to reconnect.
Remote
– Press the striped button
A
once to wake it up (one green flash to confirm). Press the
striped button
A
once more to activate Bluetooth (striped button
A
flashes red to indicate it is
broadcasting).
Diablo’s
rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection.
Bar Lights’
rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection.
Second Light:
Diablo
– Press the Function button once (one green flash to confirm). It will now be ready to
reconnect.
Bar Lights
- Press the Function button once. The screen will end up showing SYNC, it is now
ready to reconnect.
Remote
- Press the circle button
B
once. Light two will now pair.
Diablo’s
rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection.
Bar Lights’
rear LED will flash Amber/Red to show it is trying to connect to the Remote. When
connected it will flash Green once to confirm successful connection
The Remote will now operate both lights. By default, each light will react in the same way to button
presses. Ensure the lights are in programs with the same number of brightness modes, if they are
not the lights will become out of sequence. If they are out, press the function button on the light to
synchronise them.
In the
Sync App
it is possible to customise the relationship of button(s) to light(s).
Should any problems occur reset the memory of both the Lights. See
Section 8.
Then complete
the above steps again.
Note:
If the stripes button
A
is pressed more than once while pairing to light 1, only the first light
will pair, the remote switch will have to be put to sleep and pairing process will need to restart.
4. CONNECTING TWO LIGHTS TO A SINGLE REMOTE - OPERATION
EXPUG13.2_Sync.indd 2
EXPUG13.2_Sync.indd 2
12/11/2020 09:24
12/11/2020 09:24
