Exposure Lights HT 1000, User Manual

Page: 2 / 4

BATTERY FEEDBACK
HT1000 – the bi-colour battery indicator is located on the power pack. It will indicate the remaining battery
percentage whilst the light is in use and for 5 seconds after the light has been switched off.
To view the battery status from OFF, press the button once, the front white LED will flash according to the
battery status.
BI-COLOUR BATTERY INDICATOR BATTERY %
GREEN 100 - 85
GREEN PULSE 85 - 70
AMBER 70 - 55
AMBER PULSE 55 - 40
RED 40 - 25
RED PULSE 25 - 10
RED FLASH 10 - EMPTY
Low Voltage Flash
When your light’s battery runs below 10% the front white light will triple flash once.
FLASH BATTERY %
XXXX
100-75
XXX
75-50
XX
50-25
X
25-10
NO FLASH 10-0
LIGHT OPERATION ACTION
SWITCH ON DOUBLE PRESS THE BUTTON
CHANGE MODE SINGLE PRESS THE BUTTON
SWITCH OFF PRESS AND HOLD THE BUTTON FOR 1 SECOND
FLASH FROM ON PRESS AND HOLD THE BUTTON FOR 4 SECONDS
SOS FROM ON PRESS AND HOLD THE BUTTON FOR 6 SECONDS
ACTIVATE SPT+ FROM OFF PRESS AND HOLD THE BUTTON, RELEASE DURING RAPID FLASH
LIGHT OPERATION