SMART PORT TEC (SPT+)
TAP ACTIVATED POWER (TAP) – AXIS & DIABLO ONLY
The Charge Port also functions as a ‘Smart Port’.
SPT+ works as an output and allows the light to power ancillary Exposure accessories, such as the
RedEye, whilst the light is on. SPT+ can also be used to turn your light into a power bank to charge
your USB devices.
SPT+ will automatically activate when the light is on.
You can also use SPT+ when the light is off, but you will need to activate it. To activate SPT+ hold
down the Function Button and immediately release when the light emits rapid flashes.
You can then charge your devices with the Exposure Boost Cables. However, please test your
device before intended use as not all devices may be compatible.
To deactivate SPT+ simply turn the light on and off again.
NB: Ensure that SPT+ is deactivated before charging.
NOTE:
We do not recommend charging devices whilst using your helmet light as the battery can
drain considerably faster.
TAP allows the user to change the brightness mode of the light by tapping the body of the light,
rather than using the Function Button.
There are three sensitivities of TAP, for user preference.
To activate TAP, or to change the sensitivity of TAP, you need to use access Program 9 using the
Optimised Mode Selector (see OMS section).
When you release the Function Button the LED on the back of the light will be green for 2 seconds.
Whilst it is lit tap the back portion of the light to change sensitivity.
1 tap: Most sensitive.
2 taps: Medium sensitivity.
3 taps: Least sensitive.
4 taps: Deactivate TAP.
WARNING:
Only activate TAP when the light will be helmet mounted.
INTELLIGENT THERMAL MANAGEMENT (ITM)
Automatic temperature regulation to decrease energy wasted as heat, maintaining efficiency to
maximise brightness, burn time and LED longevity.
