10
17. Avoid unintentional switching on of the device. Do not connect the device to the power supply and
carry it with the fingers on the main switch. Make sure that the main switch is switched off while the
machine is being connected to the power source.
18. When working outdoors only use extension cords intended for outdoor use.
19. Stay alert when operating the machine. Do not operate tool when you are tired.
20. Check damaged parts. Before further use of the tool, any parts of the casing or other parts that are
damaged should be carefully checked to determine that they will operate properly and perform their
intended function. Check for alignment of moving parts, mounting, and any other conditions that may
affect the machine’s operation. A part of the casing or other part that is damaged should be properly
repaired or replaced by an authorized service centre unless otherwise indicated elsewhere in this
instruction manual. Defective switches should be replaced by an authorized service centre. Do not use
the tool if the switch does not turn it on and off.
21. Do not use power tools for applications other than those specified in the instruction (other than
those for which it was designed).
22. To ensure the designed operational integrity of power tools, do not remove installed parts of the
casing or screws.
23. Do not touch movable parts or accessories unless the power source has been disconnected.
24. Use your tool at lower input load than specified on the nameplate to increase working efficiency and
decrease wear out.
25. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner, benzene, alcohol, ammonia
and oil may damage and crack plastic parts. Do not wipe them with such solvents. Wipe plastic parts
with a soft cloth lightly dampened with soapy water.
26. Consult an authorized service agent in the event of power tool failure.
27. Use only original replacement parts.
28. This tool should only be disassembled for replacement of carbon brushes.
29. When using the machine pay special attention to a recoil, which is a sudden reaction of the machine
to the rotating disc blocking. As a consequence of blocking of the rotating tool, the machine tugs in
a direction opposite to the disc rotation direction. The recoil is a consequence of inappropriate use of
the machine.
30. The power cord should be kept away from the rotating parts of the machine.
31. Clean the machine’s ventilation slots regularly.
PRECAUTIONS ON USING THE MACHINE
1.
Wear protective goggles to protect your eyes.
2.
Wear earplugs to keep your ears noise-free while working.
3.
Wear dust masks.
4.
Pay attention to the correct adjustment of the grip.
5.
The tool becomes very hot during operation.
6.
Safe operation depends on one’s work posture.
7.
Wear protective shoes to protect your feet. Wear protective gloves.
8.
To avoid injury from accidental starting, always remove the plug from the electrical socket before
installing or removing the disc, plate, or other removable accessories.
9.
The machine should always be turned on/turned off at the lowest speed range (MSW-POL560C only).
Failure to follow safety recommendations and instructions may result in serious
injuries or death!
Product name
Car Polisher
Model
MSW-POL560C
MSW-POL120C
MSW-POL60C
Catalogue no
6233
6234
6235
Rated voltage [V]/Frequency [Hz]
230~ / 50
Rated power [W]
560
120
60
Rotation speed [rpm]
1800-6800
3500
3500
Sound power level L
wA
dB(A)
84
60,1
60,1
Sound pressure level L
pA
dB(A)
95
71,1
71,1
Weight [kg]
3,0
2,2
1,5
TECHNICAL DATA
SCOPE OF APPLICATION
The car polisher is designed for polishing painted metal surfaces and all other polishing works, particularly
in the automotive industry.
Do not use the car polisher to wash vehicles using detergents – there is a risk of a fatal electric shock.
The user is liable for any damage resulting from non-intended use of the device.
BEFORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
Keep the device away from hot surfaces. The device should always be used out of reach of the children and
the mentally ill. Ensure unobstructed access to the electricity plug at all times. Make sure the power source
reflects the parameters on the rating plate!
OVERVIEW
MSW-POL560C (6233)
1.
ON/OFF switch
2.
rotational speed adjustment
3.
disk
4.
additional handle
1
2
4
3
Rev. 10.05.2017
Rev. 10.05.2017
11
