4.3
BASIC INSTRUCTIONS FOR DMX512
OPERATION (STUDIO 2)
MASTER DIMMER
CH1 controls the intensity of the currently projected color
When the slider is at the highest position (255) the intensity of the output is the maximum
SELECTION
CH2 and CH3 control the intensity ratio of each of the
LEDs.
When the slider is at the highest position (255) the intensity of the color is the maximum.
CH2 and CH3 can be combined together to create whites with different color temperature.
STROBE
CH 5 controls the strobe of CH1 to CH4
CH5 has priority over CH2, CH3 & CH4.
DIFFERENT WHITES
Ch4 allow user to select 8 whites with different color temperature.
The 8 whites are take from the
CALIB
on Display panel.
ID ADDRESS SELECTION
CH6 is used to select the target ID address.
Each independent DMX address may have upto 66 independent ID addresses.
An ID address of 0 will activate all ID address locations.
COOL WHITE & WARM WHITE
COOL WHITE & WARM WHITE
12
4 USING A DMX512 CONTROLLER
2008.9.19
Summary of Contents for TOURLED 36 CW
Page 1: ...USER MANUAL...