"COLO": In the Color menu, the color calibration is selected or deactivated. When "RGBW" is
selected, the maximum brightness values at DMX = 255 are limited to the values set in "CAL2."
When "UC" is selected the Uniform-Color factory calibration is used, which adjusts devices of
different generations. If the value is "OFF", the calibration is deactivated and the device reaches
the maximum brightness.
"DIM": Dim4 technology for halogen simulation. In the menu item "DIM" the dimmer speed is set.
These decay curves simulate the dimming of classic halogen bulbs. When "OFF", the device
reacts instantly.
„CURV“: In Curve Menu, the Dimmercurve ist set like shown below.
CURV dimming
1: OFF
2: Cv1
3: CV3
4: Cv4
1
2
3
4
(100%)
"DERR": In the menu DMX-Error is set whether the device in case of a signal interrupt will hold
the last value "SAVE" or fades "BLAK".
„SLCK": Settings Lock. This menu is used to set whether the "SET" menu can only be accessed
by entering the password. In this case, the password
"UP" - "DOWN" - "UP" - "DOWN" - "ENTER" is required to make adjustments.
"STRB": In the menu strobe a distinction is made between standard stroboscope "CLAS" and
extended stroboscope "SPEC". This setting only affects the DMX personalities "TOUR", "AR2.S"
and "TR16".
E-34