Edit Static Colors
MENU
R.
(0~255)
G.
(0~255)
B.
(0~255)
W.
(0~255)
STAT
ST.
(0~20)
In the menu, static colors for stand-alone operation are set in "STAT". These are mixed using the
DMX value scale 0-255 for red, green, blue and white, as well as the strobe value 0-20Hz.
MENU
AT.01
AT.02
AT.10
AUTO
PR.01
PR.02
PR.10
Activaing Auto Programs
In the menu "AUTO", the automatic programs stored in the device are activated. The programs
"AT01" to "AT10" are permanently stored in the device. The programs "PR01" to "PR10" are
editable. This is described under "Editing User Programs". Automatic programs are transmitted
as master to connected slave devices. For master-slave operation, signals are sent via the DMX
line. This may disturb third devices.
Run Mode DMX / Slave
MENU
RUN
DMX
SLAV
The operating mode is set in the menu "RUN". For operation on a DMX controller "DMX" must
be activated. For operation as a slave device, "SLAV" must be activated. In slave mode, the
device receives static colors or played automatic programs from a connected master device.
MENU
D.(001~512)
DMX
Setting DMX Adress
The DMX start address of the device is set in the menu under "DMX". This is retained even
when changing the personality.
E-32
