background image

R

4

ZENITH

 Read the user manual before using the machine.
 This guide contains important instructions for using 

the grinder correctly and safely.

 Always keep this manual close at hand for future 

reference.

 This guide must be looked after with care for the entire 

working life of the coffee grinder

 This  guide  reflect  the  current  state  of  the  grinder 

technology and shall not be considered obsolete solely 

because update at a later date on the basis of acquired 
experience. The manufacturer reserves the right to 

make modifications to this manual with no obligation to 

update previous version (except in exceptional cases).

 Never touch the machine with damp or wet hands.

 Never use the machine when barefoot.
 Never attempt to unplug the machine by pulling the 

power cord or the machine itself.

 Do not use the machine outdoors so it can be exposed 

to weather (rain, snow, frost). It will cause material 
damage to the machine.

 The appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or 
instruction concerning the use of the appliance by a 

person responsible for their safety.

 Always use the appliance on a flat, steady surface that is 

able to support its weight.

 Always unplug the machine from the power supply 

before performing any cleaning or maintenance 

operations.

 Do not use water jets or non-suitable detergents for 

cleaning.

 In the case of machine breakdown or malfunction 

switch the machine off and do not tamper with it.

 For repairs contact an authorized service center and 

request the use of original spare parts.

 Not observing of the above precautions may make the 

machine unsafe for future use.

 Do not leave the machine switched on when it is not in 

use. Unplug the machine when not in use.

 Do not obstruct the ventilation and/or heat dissipation 

openings and/or slits nor introduce water or any other 

liquids into same.

 Never insert spoons, forks or other utensils into the 

pouring lip, or into the coffee grain container for any 
reason whatsoever while the appliance is operating.

 Always switch off the appliance before removing 

blockages from the pouring lip.

 Never immerse the machine, plug or mains cable in 

water or another liquid.

.  Should a foreign object stop the motor, switch the 

machine off immediately and contact an authorized 
service center.

 Should a foreign body stop the motor, switch the 

machine off immediately and contact an authorized 
service center.

Introduction

Warnings

Thank you for choosing the ZENITH coffee grinder
We hope you enjoy it!

GENERAL

Summary of Contents for ZENITH Automatic























Reviews: