28
Elen
R
PROgRAMMINg
Service: service alert
Service
NNNN
This counter displays the number of coffees/infusions (individual servings) dispensed by
the machine (see fig. 06).
How to access it: Press the Continuous Dispensing button when the litre counter is
displayed.
To exit and access the next menu, press the Continuous Dispensing button
again.
Use the
Maintenance cycles
option in service programming mode to program the
number of servings after which the machine alerts the user of the need to service the
machine.
To reset the servings counter:
Switch off the machine at the power switch.
Simultaneously press and hold down the 1 Short Espresso
and 1 Long
Espresso
buttons then turn on the machine.
Fig. 06
Total coffees dispensed
Number of coffees dispensed per button
Coffees Hot Water
NNNNN NNNNN
This counter tots up all the drinks dispensed by the machine (see fig. 07).
It cannot be reset. The left-hand side of the display shows the total number of coffees
dispensed while the right-hand side shows the total number of cups of hot water
dispensed.
How to access it: Press the Continuous Dispensing button
when the Service
counter is displayed.
To exit and access the next menu, press the Continuous Dispensing button
again.
Fig. 07
Dose type
Gr:N
NNNNN
This counter displays the total number of coffees/infusions dispensed per option (see
fig. 08).
The upper left-hand part of the display shows the dose type dispensed (espresso,
coffee, 2 espressos, 2 coffees, continuous dispensing, or hot water), while the right-
hand side shows the dispensing group. The lower part of the display shows the counter.
To reset the counters:
When the display shows the
Total coffees/infusions dispensed
,
simultaneously hold
down the 2 Short Espressos
and 2 Long Espressos
buttons for 4 seconds.
The display will show the message "Totals reset" (see fig. 09).
Fig. 08
Coffees Hot Water
Totals reset
Fig. 09
