27
Elen
R
PROgRAMMINg
Accessing the counters
Dose programming
Select 30 s
With the machine switched ON, hold down the Continuous Dispensing button for
over 8 seconds (until the "Dose programming" menu is displayed, see fig. 02).
Hold down the Continuous Dispensing button
until the "Set clock" menu is
displayed (see fig. 03).
Briefly press the Continuous Dispensing button
. The display will show the
"Counters" option (see fig. 04).
Fig. 02
Set clock
Fig. 03
Counters
Fig. 04
Litre counter
Litres
NN
This counter displays the water volume in litres dispensed by the machine. It is
principally used to monitor water-softener regeneration cycles.
How to access it: When "Counters" is displayed, press the 2 Short Espressos button
. The display will show the number of litres of water dispensed by the machine
(see fig. 05).
To exit and access the next menu, press the Continuous Dispensing button
.
Use the
Water filter: water-softener regeneration
option in service programming mode
to program the number of litres of water after which the machine displays the water-
softener regeneration alert. The counter tops up the litres of water dispensed by the
machine and alerts the user when it is time to regenerate the water softener.
To reset the litre counter:
Switch off the machine at the power switch.
Simultaneously press and hold down the 2 Short Espressos
and 2 Long
Espressos
buttons then turn on the machine.
Fig. 05
Programming
