e.g. Chempro SDP or similar. Then flush
the system through with clean water for
approximately 30 seconds.
4. If the pump fails to deliver water, the most
likely cause will be air in the system.
Switch off the pump and shake the pump
assembly in the water. Then switch on
again.
WATER FILTER SYSTEM
CARVER CRYSTAL 3 FILTER SYSTEM
The Carver Crystal 3 Filter is designed to bring
water into your motorhome in a convenient
and efficient manner. The system includes a
special two-stage filter which removes
unpleasant tastes, smells and colouring to give
clear, fresh tasting water.
The first stage is a filter screen which retains
small solids. The second stage is a bed of
silverised activated carbon, which removes
chlorine tastes and smells, etc. This is done by
absorption and by mechanical filtration
reducing algae and bacteria. Bacteria retained
are then destroyed by the silver content. This
action also prevents bacteriological growth in
the filter.
The Carver pump is detached from the crystal
housing for security and whilst touring.
CHANGING THE FILTER CARTRIDGE
When inserting a new filter cartridge into the
housing, smear vegetable oil on the two ‘0’
rings. (This reduces friction and makes it easier
to remove.)
It is recommended that the filter cartridge is
replaced after 30 days of use.
To remove the filter cartridge, pull the tab on
the bottom of the filter, which will release the
filter from the housing (see fig. 4).
Always ensure that the new filter cartridge is
pushed fully home into the housing.
STERILISING
When cleaning the water system at the start of
the season it is recommended that a new filter
cartridge is fitted.
WINTER USE
In the winter there is a possibility that the water
in the outside container will freeze, therefore
please discuss with your dealer the fitting of a
winterisation kit.
CARVER COMPACT
On the Compact Water Filter System Housing,
raise the lid, clean both the water socket and
the plug of the pump assembly.
Plug the pump assembly into the socket. Turn
the top security clip anti-clockwise and the
bottom security clip clockwise to lock the plug
in place.
Place the pump into the water container,
ensuring that it is fully submerged before
operating the system. A dust cover is available
to stop contaminants falling into the water.
DO NOT REMOVE BY PULLING THE HOSE
OR ELECTRIC CABLE.
HOW TO USE A WATERLINE WITH
THE INBOARD WATER TANK.
1. Place the pump switch on the control
panel to the 0 position.
2. Place tap next to the tank into the centre
position. See diagram below.
Pipe
Tap
Pipe
30
MOTORHOME EQUIPMENT
Summary of Contents for 2003 Autostratus FB
