8
NOTE:
When using a power adapter, please increase the
separation of the main unit and the power adapter to
avoid interference of RCC signal receiving.
SET THE CLOCK MANUALLY
1. Press and hold [
] button to enter time and
date setting.
2. The setting parameter will flash.
3. Press [
] button once, the figure will increase
1 unit (when setting minute, second will reset to 0).
Press and hold the [
] button, the figures will
increase rapidly.
4. Press [
] button once, the figure will decrease
1 unit (when setting minute, second will reset to 0).
Press and hold the [
] button, the figures will
decrease rapidly.
5. Press [
] button to confirm setting and enter
to next parameter.
6. Sequence of setting: Weekday Language
12/24 Hr
Year (2000 – 2099)
Date format
Month
Date
Hour
Minute
Zone
°C/°F
Exit
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
LANGUAGE
Sequence of setting weekday language:
German (GER)
English (ENG)
French (FRE)
Italian (ITA)
Dutch (DUT).
TIME ZONE SETTING
To set a different time zone, proceed as follows:
1. Press and hold [
] button, enter time and date
setting.
2. Press [
] button several times until the display
shows the time offset “Zone 00”
3.
Press the [
] button to increase or
[
] button to decrease the Time zone offset.
°C/°F SETTING
1. Press and hold [
] button, enter time and date
setting.
2. Press [
] button several times until the
display shows °C/°F.
Summary of Contents for RDP1001
Page 71: ...71...
