manualshive.com logo in svg

Exploranium GR-135, System Manual, Page: 60 / 80

Share
Download
Exploranium GR-135 System Manual Download Page 60

 

SAIC Exploranium – GR-135 System Manual 

 

 

 

 

 

 

            page: 60 

 
 
 
 
 
 
 
 
 
Data Memory 
 
You can download data directly from the GR135 anytime by selecting Download from the Data Memory 
menu on the main IdentiView screen. If the GR135 is removed from the DS, you can still save the data 
(since it was downloaded to a .temp file) by clicking the “Save GR135 data to file” button on the main 
IdentiView screen. Once the data is saved you can erase all the spectra in the data memory of the 
GR135 by selecting Erase from the Data Memory menu.  
 
 
Opening data files 
 
You can open a previously saved data file by clicking the “Open data file for processing” button on the 
main screen and selecting a data file from the Open box. 
 
 
Uploading isotope libraries 
 
The installed LabView software comes with a standard isotope library. You can load this library or other 
isotope libraries into your IdentiView software: 

1.

 

Click the Upload Library button on the main screen. The Library dialog box appears.  

2.

 

Click the Select Library Directory button. The Select a Library Directory dialog appears. 

3.

 

Find a library folder and click the Select Cur Dir button.  

4.

 

Select the desired library file. The library name, type, directory path, and associated isotopes now 
appear in the Library dialog box.  

 

 
 
 
 
 
 
 
 
 
 
 
 
 

5.

 

Click the Upload Library button to have IdentiView accept and apply the library information.  

 
The isotopes will now appear in the display when you view the search data.  
 
 
 
 

NOTE:  When viewing dose/scan data from earlier versions of IdentiView, a checksum error 
will be displayed due to a problem with calculating checksum values inside the GR-135 
version 1.24 or earlier.  

Summary of Contents for GR-135

















































































Reviews:

No comments