Exploranium GR-135 System Manual Download Page 46

Page: 46 / 80

SAIC Exploranium – GR-135 System Manual

page: 46

POWER SUPPLY OPTIONS
A.

Internal Rechargeable Battery
Type:

2 "D" cells, 1.25 V NiCd.

Operation time:

Typically 8 hours of operation at 25

C, no backlight, 4 AH NiCd.

Charging:

External, constant current float charger, overnight charging,

full charge indication by LED.

B. Internal

Battery

Type:

"D"

cells,

alkaline.

Battery Life:

Typically 15 hours of operation at 25

C, no backlight,

with Alkaline EVEREADY #1250.

C. External:

Type:

12 VDC, 1.0A external power supply

Voltage Range:

From 9-24VDC.

CONNECTORS

Charger (Ext. Power Supply): 2.5 mm power circular jack, "+" on the center pin.

Mating connector: 2.5 mm power circular plug.

Serial Channel:

3.5 mm stereo jack.

Mating connector: 3.5 mm stereo plug.

Docking Station:

4 spring loaded pins for power and RS232

PHYSICAL

Dimensions:

L = 9.25" (235 mm)

W = 4.5" (110 mm)

= 3.9" (100 mm), 6.75" (170 mm) including handle

Weight:

1.9 kg ( 4.4 lbs) without battery.

2.4 kg ( 5.5 lbs) including battery.

ENVIRONMENTAL

Operating Temperature Range:

- 10 to + 50

Storage Temperature Range: - 20 to + 60

Protection:

Weather proof , dust and water sealed (no immersing).

Non-condensing Relative Humidity: Less than 90% at 40

Vibration:

0.5G max. (10 - 300 Hz, XYZ directions, 1 h)

Shock:

3G (10 mS, XYZ directions, 1 time each).

RFI/EMI Emission:

Complies with FCC rules (47 CFR Part 15) for class A.

Full CE Certification

Summary of Contents for GR-135

















































































Search results

Summary of Contents for GR-135

Reviews:

Exploranium GR-135, System Manual, Page: 46 / 80

Search results

Summary of Contents for GR-135

Reviews: