EX-9543 Enhanced 10/100Base-TX to 100Base-FX Converter
- 17 -
Getting Connected
Powering On Unit
The Converter uses an AC power supply 100~240V
AC, 50~60 Hz. The Converter's power supply
automatically self-adjusts to the local power source
and may be powered on without having any or all LAN
segment cables connected.
1. Insert the power cable plug directly into the
receptacle located at the back of the device.
2. Plug the power adapter into an available socket.
Note:
For International use, you may need to change the AC
power adapter cord. You must use a power cord set that
has been approved for the receptacle type and electrical
current in your country.
Warning
Please exercise caution when using power tools. Also,
install this unit away from damp or wet locations, or in
close proximity to very hot surfaces. These types of
environments can have a detrimental effect on the
converter and cables. An ideal location is a lightly
cooled place such as a typical equipment room.
Because invisible laser radiation may be emitted from
the aperture of the port when no cable is connected,
avoid exposure to laser radiation and do not stare into
open apertures.