20
EX-9486C-W Serial to Wi-Fi Configuration
Hardware Installation
Before search device, Hardware devices shall be installed ready. Firstly,
please prepare a PC, a HUB and EX-9486C-W.
1.
Use PC Ethernet port to connect with HUB and then use other port of
switch hub to connect with EX-9486C-W.
2.
Insert power cord of EX-9486C-W.
(The LAN Light will flash once on the beginning, 3 seconds later the light
will be on, 30 seconds later the WLAN light will be on and afterwards
about 10 seconds the SYS light will be on.)
Search Device
After finishing EEX-TOOL installation and lunch the EEX-TOOL, you can
click the “Search Device” icon at left side upper corner. It will detect the
existence of the installed converters on the network.
