12
Left Side
DC-In Power Outlet
The Serial to Wi-Fi Converter is powered by a single 12V DC(Inner
positive/outer negative) power supply and 1.0 A of current. Connect the
power line to the power outlet at the
left side of Serial to Wi-Fi Converter and
put the adapter into the socket. If the power is properly supplied, the “SYS”
red color LED will be on after 30 seconds.
Ethernet Port
The connector for network is the usual RJ45. Simply connect it to your
network switch or Hub. When the connection is made, the LAN LED
indicator will light. When data traffic occurs on the network, red (Rx/Tx)
indicator will blink during data transferring and receiving.
Antenna Connector
The connector for antenna is a standard reverse SMA jack. Simply connect it
to a 2.0dBi or 5.0dBi dipole antenna (Standard Rubber Duck) and it is 50
Ohms impedance and can support 2.4GHz frequency.
Reset Button
Ethernet Port
Antenna
DC-In
Power Outlet
Reset Button
