Expert EX-9132C-2RS485, Operation Manual

Page: 26 / 43

25
□
□
□
Parameter Setting Page Field Description
□
□
□
IP Address
The IP address of converter device, 4 digits separated by '.' Don’t let it
conflict with the other devices on the network.
If DHCP client mode is enabled and there's a DHCP server on the network, this
field will be assigned by DHCP server automatically.
□
□
□
Subnet mask
Subnet mask of the converter device has connected to. “255.255.255.0” is
usually used for small network, “255.255.0.0” for larger network, 4 digits
separated by '.'
If your IP address is provided by an ISP or the internal network administrator,
please inquire of them that information and type it correctly.
If DHCP client mode is enabled and there's a DHCP server on the network, this
field will be assigned by DHCP server automatically.
□
□
□
Gateway address
Gateway or Router IP address. 'Gateway' is a device which connects local
network to external network. If you need to communicate with other networks
or your device owns a real IP address on the internet, please inquire of them that
information and type it correctly. If there's no gateway on the network, just
leave it as “0.0.0.0”.
If DHCP client mode is enabled and there's a DHCP server on the network, this
field will be assigned by DHCP server automatically.
□
□
□
DHCP client
DHCP client mode could be enabled/disabled statues. If DHCP is enabled, there
should be a DHCP server on the network. If DHCP is disabled, [IP address],
[Subnet mask], and Gateway address] should be manually assigned
.
□
□
□
Auto Reset
It is for resetting when the device has been disconnected or some reasons, the
data stop transmitting for a while. You can prevent it and restart the device after
waiting a while (1
∼
99 hours) as your settings.