17
When you activate the tool, it will detect the existence of the installed converters and
depict the converters’ status such as IP address, Subnet Mask, MAC Address, and
Device ID (see Figure 3.1). The Setup Tool only can setup one converter at a time.
Thus if there are more than one converter on the network, please shut down or
disconnect other converters. Otherwise the EXBrowser.exe can not detect the converter.
Due to the nature of broadcast UDP packets, EXBrowser has following characteristics:
□
□
□
Broadcast packets are not limited by subnet. Even if the IP address of the converters
and the computer running EXBrowser that do not belong to the same subnet, it still
works fine.
□
□
□
Broadcast packets can not pass routers.
EXBrowser can only be used to monitor
devices with computer running EXBrowser in the same segment of local area
network.
Note:EXBrowser also can use on EX-9132C-2RS485
(Figure
3.1)
Summary of Contents for EX-9132C-2RS485
Page 1: ...EX 9132C 2RS485 Serial to TCP IP Converter Version 1 2 14th Nov 2012 ...
Page 15: ...14 Wiring Architecture RS 232 Wiring Architecture RS 422 RS 485 Wiring Architecture ...
Page 35: ...34 Figure 6 2 Select TCP IP Winsock option at the Connect using field see Figure 6 3 ...
Page 38: ...37 Figure 6 5 ...
