Pack Contents
1 x IRiS LED Bubble Wall
1 x Low Voltage Transformer
1 x Foot Pump for filling
1 x Drain Pipe
1 x Instruction Manual
1 x Fixing Kit
1 x Installation Manual
The IRiS Bubble Wall should be installed by a competent person, following the steps in the
installation manual.
Getting Started
Turn on the IRiS Bubble Wall. The unit will scroll through the colours and then go off. This is
completely normal. Now see sections below to start using the IRiS Bubble Wall with an IRiS Talker.
Pairing to IRiS Listeners
This procedure is split into 2 sections, one for those who do not have an IRiS Master Pairer and for
those who do.
Without an IRiS Master Pairer
Every IRiS Listener has a button on it called a pairing button. To get the IRiS Bubble Wall to work with
a product, first turn on the IRiS Bubble Wall, then decide which IRiS Talker you want to control it
with – in this example we use the IRiS Qube, but all work in the same manner. Next find the pairing
button (located next to the power socket) on the product and press it. You then need to activate the
IRiS Qube within 5 seconds (in this case you would turn the Qube over). The IRiS Bubble Wall will
now change colour every time you turn the Qube if correctly paired. If it does not, then repeat the
above.
