31
User manual
3.3.3 RUNNING A PROGRAM
Action :
1) Use BANK UP/DOWN buttons to change Program banks if necessary.
2) Press the AUTO DEL button repeatedly until the AUTO LED turns on.
3)Adjust the PROGRAM speed via the SPEED fader and the loop rate via the FADE TIME fader.
4) Alternatively you can tap the TAPSYNC DISPLAY button twice. The time between two taps sets the time
between SCENES (up to 10 minutes).
Deselect Blackout if LED is lit.
3.3.4 CHECK PROGRAM
Action :
1) Press and hold the PROGRAM button until theLED blinks.
2) Use the BANK UP/DOWN buttons to select the PROGRAM bank to review.
3) Press the SCENES buttons to review each scene individually.
3.3.5 EDITING A PROGRAM
Action :
1) Press and hold the PROGRAM button until the LED blinks.
2) Use BANK UP/DOWN buttons to change Program banks if necessary.
3) Select the desired fixture via the SCANNERS button .
4) Adjust and change fixture attributes using the channel faders and wheel.
5) Press the MIDI/ADD button to prepare the save.
6)Select the desired SCENES button to save
Deselect Blackout if LED is lit.
3.3.6 COPY A PROGRAM
Action :
1) Press and hold the PROGRAM button until the LED blinks.
2) Use BANK UP/DOWN buttons to select the PROGRAM bank you will copy.
3) Press the MIDI/ADD button to prepare the copy.
4) Use BANK UP/DOWN buttons to select the destination PROGRAM bank.
5) Press the MUSIC BANK COPY button to execute the copy. All LEDs on the controller will blink.
All 8 scenes in a Program bank will be copied
C 512 M
