11
11
User manual
2. Install and set up
* Wheelsat the bottom of the X-SW1500 coordinating removable, diagonal wheel set fixer, the machines
will be placed in the designated, the pressure fixing device to fix the machine to avoid sliding, only need
to reverse direction under the pressure of the fixator can move the
* Du to large size of the machin, please do not put it on the slope.
* Check the 3 training valves are closed.
* Check Power Switch is OFF, connect the power cable using a grounded plug.
* Connect the hose, length is 2 meters, can be adjusted in accordance to space.
* Open the machine using the door handle at the top, above the output; Fill the reservoir through this
door with DEMINERALIZED WATER until it rise at the bottom line of the internal window as show in next
picture, at least 5 liters are needed :
Note : This reservoir is number 1, there is a number 2 which is used automatically from pumping into
number 1.
* Close the door and tighten the handle.
* The tanker made of whiteplastic with a smal hose in it’s cap, is the fluid tanker, it have to be filled with
SMOKE FLUID, fill it and then close the cap.
* WARNING, Fluid quality rules your machine’s lifetime, avoid absolutely cloloured fluids and any
other type of additives like perfumes or any other. Differents fluids will give a different effect, fast
dissipation, heavy fog, etc…
* Check there’s no water or fluid on and around the machine as on powering cables around.
* Switch On the power. After launching sequence, display should show « WARMING UP ».
* On the first use, wait for display to show « Ready to fog » use manual mode by pressing « VOLUME »
and make a 2 minutes test, then press « STOP ».
X-SW1500
Ultrasound Low Fog
