14
9.3 FI IONISATION SECTION
The new FI negative ionisation cell has been designed and built to be
applied inside air handling units or along air distribution channels.
FI represents a brand new development in the air handling field and its
insertion after electrostatic or absolute high efficiency filtering, guaran-
tees a reduction of odours and sterilisation of the walls, along with
greater environmental comfort.
Thanks to its multipolar connection system, it is possible to insert multi-
ple ionising cells according to the filtration and air flow requirements;
they are assembled and disassembled by simply sliding on guides in
the air handling centre. The
integrated electronic power supply circuit is equipped with LEDs, which
signal correct filter operation.
Model
air flow m
3
/h
Emission of ions/cm
3
@ 100mm
XFI300
700 to1600
5'000’000
XFI600
1300 to 6800
5'000’000
9.4 FX OZONISATION SECTION
FX ozonising cell is ideal for deodorisation, sanitisation, hygienisation
and disinfection of air in plants and environments as it is able to de-
grade and eliminate any polluting or harmful elements such as viruses,
bacteria, mites, spores, moulds, insects and even harmful chemicals
and unpleasant odours. Thanks to its multipolar connection system, it is
possible to insert multiple ozonising cells according to the filtration and
air flow requirements; they are
assembled and disassembled by simply sliding on guides in the air
handling centre. The integrated electronic power supply circuit is
equipped with LEDs, which signal correct filter operation.
Model
air flow m
3
/h
Emission Range O3 [ppm] or [µg/m
3
]
XFI300
400 to 1700
Min. 0.1ppm or 196µg/m
3
MAX.
XFI600
800 to 3400
5'000’000
9.5 DROPLET SEPARATOR OR TURBULATOR SECTION
Droplets separators or turbulators are made of stainless steel, always
of the same base dimensions as the electrostatic filters. Their function
is to retain any oil droplets that could leak out of the filters if used at
high flow rates or to create a turbulence between Ions and Ozone if
combined with the FI and FX modules, to promote deodorisation before
the activated carbons.